No part of this publication may be reproduced, or transmitted, or stored, in any form or
by any means, electronic, mechanical, photocopying, recording, or otherwise, without
the prior written permission of SheetMetalWorkBook.com
Sixth Edition Reformatted for Internet
©2012 SheetMetalWorkBook.com
More 90° Bends
Work Problems
1. Mat Thk =
2. Bend Rad =
3. Bend Ded =
4. Dev Len =
5. Mat Thk =
6. Bend Ded =
7. Dev Len =
When you see dashed lines on a blue
print then you are dealing with phantom
lines. The solid lines are lines you
can see and the phantom lines are
hidden from our view. In the front view
the two solid lines at the bottom would
mean that the flange is coming out
toward us. Also in the front view near
the top is a hidden line meaning that
that flange is going away from us.
8. Mat Thk =
9. Bend Ded =
10.Dev Len =
print then you are dealing with phantom
lines. The solid lines are lines you
can see and the phantom lines are
hidden from our view. In the front view
the two solid lines at the bottom would
mean that the flange is coming out
toward us. Also in the front view near
the top is a hidden line meaning that
that flange is going away from us.
8. Mat Thk =
9. Bend Ded =
10.Dev Len =
